8
8.43
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.
31. Install the brake disc onto the pinion shaft. Install the
washer and apply Loctite
®
262
™
or 2760
™
to the
mounting bolt threads. Torque the bolt to
specification.
Park Brake Disc Mounting Bolt:
14 ft-lb (20 Nm)
32. Thoroughly clean the shift shaft housing. Be sure
the transmission is in High gear prior to
reassembly.
33. Install the sector gear (16T) onto the shift drum shaft.
Install the shift shaft assembly and sector gear (11T)
into the bushing pocket on the left side. Align the
timing marks on the gears as shown.
34. Install the spacer onto the shift drum shaft.
35. Install the detent star onto the shift drum shaft. Be
sure to install the detent star with the raised edge
facing outward and skip-tooth aligned.
TRANSMISSION
To Next Page
Loading...
