Slide Scanner Repair Manual Diagnostics and Troubleshooting
117
Table 5-5. Scanner Tester Panel (Cont’d)
Item/Box Description
Stop Clicking the mouse on this box completely stops the
slide scanner's test sequence. The black arrow changes to
a white arrow indicating that the run-time version of
LabVIEW stops running.
Note:Usually the scanner tester can not be stopped in the
middle of a test sequence. However, if an emergency
occurs, this button will stop the scanner tester.
To restart the scanner tester, just click the mouse on the
white arrow; the arrow becomes black again and the
scanner tester resumes the selected image quality tests.
Close Box Used to quit the scanner tester due to a malfunction or
before the selected image quality tests are completed.
Running/Stopped Indicates the operational (Running/Stopped) status of the
Black/White Indicator scanner tester.
Black arrow indicates that the virtual instrument (VI)
program is running (actually idling and waiting for input
data).
White arrow indicates that the virtual instrument (VI)
program is stopped.
To Next Page
Loading...
Need help?
General
