Slide Scanner Repair Manual Diagnostics and Troubleshooting
116
Table 5-5. Scanner Tester Panel (Cont’d)
Item/Box Description
CT Test Sequence P/F (Pass/Fail)-Indicates whether or not a selected image
(Cont’d) quality test passed (P) or failed (F).
Show Image Used to show the test scans as the Scanner Tester operates.
If selected, a window appears showing the test scans as the
Scanner Tester operates.
Start Test Clicking the mouse on this box starts the selected quality
image tests.
Status Displays the current status of the scanner tester.
Process Variable Optional user entered data added to the composite results file.
Log Allows the user to track data such as the GMT Target #, CT
Target #, operator, etc.
Constants Displays the test file to be used by the scanner tester.
Note:The first time a slide scanner is tested, the
scanner tester prompts the user to select an
Aims and Tolerances file. A file called Constants
contains the needed reference finding specifications
that the scanner tester uses.
When prompted by the test software, select the applicable
Constants file and then double click the mouse to select it.
Constants File Displays the version of the application and reference
Pathname finding(performance) test files being used by the scanner
tester.
Measurements Displays the current test results for the particular image
quality test being performed. Display is updated only after all tests
are run.
After test, the measurements window displays the first failed test
results. View measurements of other tests using the selector.
Green= Pass
Red = Fail
Black= Not Tested
To Next Page
Loading...
Need help?
General
