Slide Scanner Repair Manual Diagnostics and Troubleshooting
121
Initial Setup - Complete Image Performance for LabVIEW Version 4
1. Insure scanner SCSI ID is set to 6 and properly terminated on the SCSI bus.
2. Turn on the Slide Scanner.
3. Turn on the host computer
4. Double click on the LabVIEW 4 Icon. The Choose the VI to open dialog box appears.
5. Select the correct LabVIEW Runtime Version 4 software to start the program. A dialog
box (Figure 5-5) appears with the words Choose the VI to open.
Figure 5-5. Choose the VI to open window
6. Open IPT Library (68KRT) or, (PPC RT) v1.02 - depending on the type of Mac. A File Box
(Figure 5-6) appears indicating the IPT Test choices that can be selected.
Figure 5-6. IPT test choices
To Next Page
Loading...
Need help?
General
