Slide Scanner Repair Manual Scanner Overview
15
Table 1-2. Slide Scanner Features (Cont'd)
Feature Description
Power Receptacle Standard receptacle with ground.
Power Cord Standard cord with ground.
Power Fuse Receptacle The fuse receptacle contains two fuses: active and
(SS35 Only) spare.
The active fuse protects the slide scanner's electronics
from any sudden surges or overloads.
Note: If the active fuse fails (blows), always attempt to
find out the cause of the malfunction before
replacing the blown fuse with the provided spare.
Replace the spare fuse with a new one as
soon as possible.
Power Fuse Not user accessible. Located on power supply PC
(SS35 PLUS) board.
SCSI ID Selector/Indicator The slide scanner's SCSI ID is preset at the factory
to 6.
SCSI ID position 7 is reserved for the SCSI adapter to
which the SCSI device(s) are connected.
Note: DO NOT change this value unless other SCSI
devices are attached to the slide scanner and
one of them is assigned to SCSI value 6.
If the preset SCSI value must be changed, refer
to the applicable slide scanner User's Guide for
detailed instructions on how to change the slide
scanner's SCSI value.
To Next Page
Loading...
Need help?
General
