Precor Precision 400 Series - Page 75

12. Switch the power “ON”.
13. Start a manual Workout. Operate the INCLINE controls through the minimum to max-
imum limits while verifying normal incline operation.
14. Switch the power “OFF”.
15. Reinstall all removed covers, see "Covers and Panels Replacement" on page75.
16. Verify full operation and return to service, see ().
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 67
5 Adjustment Procedures
Lift Motor Calibration