PRISMJET 54 Gen2 - Page 196

Panel setup menu PrismJET 54 Gen2 OPERATION MANUAL
206 5.9 Roll Length Manage menu
5.9.2 Simple Print menu
Follow the procedure below to simple print.
1. Turn ON the printer and load the media.
3.4.2 Setting Roll Media
2. Display the Roll Length Manage menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• “Menu 1: Setup>” is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
b. Press the [+] key or [–] key to select “Menu9: RollLengthMan>”.