PRISMJET 54 Gen2 - Print Mode

Before using PrismJET 54 Gen2 OPERATION MANUAL
90 3.6 Adjust Print
• “Pattern *: 6” (* indicates a pattern name as shown below) is displayed on the operation panel.
• The print modes and their pattern names are as follows.
NOTE
• Refer to the following for Print mode.
5.1.1.1.1 Print Mode menu
5. Press the [+] key or [–] key to enter the number that you selected in Step 4.
NOTE
• When you press the [Cancel] key, the input operation is not executed and “Adj.2: Rough Pattern”
is displayed on the operation panel.
PrintMode PatternName
High Quality D
Quality D
Production D
High Speed D