PRISMJET 54 Gen2 - Installing Ink Cartridges

PrismJET 54 Gen2 OPERATION MANUAL Before using
3.3 Installing ink cartridges 43
3.3 Installing ink cartridges
This section describes the procedure to install the ink cartridges and high capacity pack adapter.
CAUTION
• Before operation, make sure to read the Safety Data Sheet (SDS).
• Wear protective equipment (gloves, goggles or eye protection, protective mask,
protective clothing) when handling ink.
Be cautious that ink does not get into your eye or make a contact with your skin.
• When ink gets into your eye or make a contact with your skin, wash with water
immediately.
• If left as it is, it may cause red eye or light inflammation. If it is necessary, please
see your doctor immediately.
• Do not disassemble ink cartridges.
If disassembled, there is a possibility that ink might come into contact with eyes or
skin.
• Do not perform the following operations during ink charging.
• Do not turn OFF the printer.
• Do not unplug the power cable.
• Do not open the cover.
• Do not raise the media loading lever.