PrismJET 54 Gen2 OPERATION MANUAL Before using
3.2 Turning the power ON/OFF 41
3.2.2 Turning the power OFF
Follow the procedure below to turn the printer OFF.
1. Verify the following regarding the operational condition of the product.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
2. Press the [Power] key on the operation panel to turn OFF the printer.
• The Power lamp on the operation panel is turned off.
• If the operation panel is in the following status, the power is ON.
• The [Power] key is pressed in.
• Power lamp is on (blue).
Press the key once again to turn OFF the power.
• The printer starts the procedure to turn the power OFF.
• “Power Off” is displayed on the operation panel.
• All the lamps on the operation panel and the LCD monitor are turned OFF.
• The printer automatically turns the power OFF.
• If there is a problem during turning OFF operation, a message is displayed on the operation panel
and the printer may stop operating.
If operation stops, refer to “
7 Troubleshooting” and deal with the problem.
• After turning OFF the printer, wait for ten seconds or longer to turn it ON again.
To Next Page
Loading...