PRISMJET 54 Gen2 - Warning Labels

PrismJET 54 Gen2 OPERATION MANUAL Safety instructions
1.3 Warning labels 19
1.3 Warning labels
This section explains the handling of warning label, pasting location and types.
Warning labels are attached to parts of the printer that need special caution.
Understand the locations and the descriptions of the danger associated with each label before operating
the printer.
1.3.1 Handling the warning labels
When handling the warning labels, be careful about the following points.
NOTE
• Check whether all the warning labels can be read.
If the letters or illustrations on the label are not clear, remove the dirt from the label.
• Use cloth, water and mild detergent for removing dirt from the warning label.
Avoid either organic solvents or gasoline.
• It is necessary to replace the labels if they are damaged, lost or illegible.
If the warning labels have to be replaced, contact your local PrismJET Dealer.
1.3.2 Location and type of warning labels
Pasting locations of the warning labels are shown in the following figure.
(1) Front
1
2
33
2