Before using PrismJET 54 Gen2 OPERATION MANUAL
36 3.1 Power cable connection
3.1 Power cable connection
This section explains power cable connection.
• Be sure to use the specified power cable.
Using power cables other than the specified can cause an electric shock or fire.
• Use a power cord set which is compatible with the safety standards, power supply
voltage, and plug shape used in the country where this printer is used.
• Use a power cord set which is equipped with a protective earth, and securely
connect it to the outlet.
• Do not use a damaged power cable.
It could lead to an electric shock and fire.
• Pay attention to the following points when handling power cable.
• Do not tamper with the power cable.
• Do not put heavy objects on the power cable.
• Do not bend, twist or pull the power cable by force.
• Do not route the power cable near heating appliances.
• Contact SIGNWarehouse Product Support in case of power cable damage.
• This product is also designed for IT power distribution system with phase-to-phase voltage 230V.
To Next Page
Loading...