PrismJET 54 Gen2 OPERATION MANUAL Maintenance
6.2 Cleaning the printer 247
6.2.3 Head cleaning
If printed data is blurred or lacks part of it, clean the print head surface and nozzle (Head cleaning).
Follow the procedure below to perform Head cleaning.
• When not using the printer for a long period (one week or more), perform Head cleaning once a
week.
If not performing Head cleaning, the print head is clogged. Doing so will preserve print quality.
When you may not be able to run a weekly cleaning on the printer that is in sleep mode: Perform
"Longstore" and then power off the printer.
6.5.1 Long-term storage
• Failure to clean and maintain your printer may void the warranty.
1. Confirm that the operation panel is Normal.
2. Make sure that the media loading lever is lowered.
3. Press the [>] key on the operation panel to select the cleaning mode.
4. Press the [Cleaning] key on the operation panel for at least two seconds.
To Next Page