PrismJET 54 Gen2 OPERATION MANUAL Panel setup menu
5.1 Setup menu 151
Slant Check Sets up slanting detection during media loading.
• [Enter] key: shifts to the sub menu.
5.1.14 Slant Check menu
Auto Cleaning Sets up the time for auto cleaning during standby, before printing, and during printing.
• [Enter] key: shifts to the sub menu.
5.1.15 Auto Cleaning menu
Longstore Wash the print head with the cleaning fluid.
• [Enter] key: shifts to the sub menu.
5.1.16 Longstore menu
CR Maintenance Performs maintenance.
• [Enter] key: shifts to the sub menu.
5.1.17 CR Maintenance menu
Initialization Returns the settings of the printer to default.
• [Enter] key: shifts to the sub menu.
5.1.18 Initialization menu
IP Address Sets the IP address of the printer.
• [Enter] key: shifts to the sub menu.
5.1.19 IP Address menu
Subnet Mask Sets the subnet mask of the printer.
• [Enter] key: shifts to the sub menu.
5.1.20 Subnet Mask menu
Gateway Sets the gateway.
• [Enter] key: shifts to the sub menu.
5.1.21 Gateway menu
Header dump Set whether or not to print the dump data of print data.
• [Enter] key: shifts to the sub menu.
5.1.22 Header Dump menu
Start Feed Rewinds or feeds the media the amount specified by the set value.
• [Enter] key: Moves to the sub menu.
5.1.23 Start Feed Menu
Alert Buzzer Selects how to turn off the printer beep sound when an error occurs.
• [Enter] key: shifts to the sub menu.
5.1.24 Alert Buzzer menu
Front Interlace Sets the media edge treatment function.
• [Enter] key: shifts to the previous menu.
5.1.25 Front Interlace Menu
Nozzle Select You can set whether to reduce the print head nozzles for printing.
• [Enter] key: shifts to the sub menu.
5.1.26 Select Nozzle menu
Temporary Displays the menus which have been set to hide in the Menu Option menu temporarily.
• [Enter] key: returns to the previous menu with all set up items displayed.
• [Cancel] key: returns to the previous status in the Selection menu when the Setup menu is
displayed.
5.4 Menu Option menu
Setup item Description
To Next Page
Loading...