PRISMJET 54 Gen2 - Installing 220 Ml Ink Cartridges

PrismJET 54 Gen2 OPERATION MANUAL Before using
3.3 Installing ink cartridges 45
3.3.1 Installing 220 ml ink cartridges
Follow the procedure below to install the 220 ml ink cartridge.
1. Turn the printer ON.
• The printer starts the initializing operation.
• After the initial operation is compete, “Start Ink Charge – > E” is displayed on the operation
panel.
2. Press the [Enter] key on the operation panel.
• “Insert Cleaning cart.” is displayed on the operation panel.
3. Take out the cleaning cartridges (4 pieces) from the bag.