PRISMJET 54 Gen2 - Page 207

PrismJET 54 Gen2 OPERATION MANUAL Maintenance
6.1 Replacing consumable components 217
(2) Type
Genuine EnduraINK PRO ink cartridges that are compatible with the printer are as follows.
Genuine MUTOH ink cartridges that are compatible with the printer are as follows
NOTE
• To use 1000ml ink bags, high capacity pack adapters (option) are required. For details on high
capacity pack adapters, contact SIGNWarehouse Product Support or your PrismJET dealer.
• Use genuine ink cartridges for replacement.
This printer is designed to use genuine ink cartridges.
If you use an ink bag that is not approved by SIGNWarehouse Product Support,
printing might become blurred, or the end of the ink in the bag might not be detected correctly.
• Any problems caused by using an ink bag other than those recommended above will not be covered
by the warranty, and repair expenses will be paid by the customer.
Description Part No.
Ink cartridge K (Black: 220 ml) PRNI-SW-EIP-220-BK-MUT
Ink cartridge C (Cyan: 220 ml) PRNI-SW-EIP-220-CY-MUT
Ink cartridge M (Magenta: 220 ml) PRNI-SW-EIP-220-MG-MU
Ink cartridge Y (Yellow: 220 ml) PRNI-SW-EIP-220-YL-MUT
Ink bag K (Black: 1,000ml) PRNI-SW-EIP-1000-BK-MUT
Ink bag C (Cyan: 1,000ml) PRNI-SW-EIP-1000-CY-MUT
Ink bag M (Magenta: 1,000ml) PRNI-SW-EIP-1000-MG-MUT
Ink bag Y (Yellow: 1,000ml) PRNI-SW-EIP-1000-YL-MUT
Description Part No.
Ink cartridge K (Black: 220 ml) VJ-MS31-BK220U
Ink cartridge C (Cyan: 220 ml) VJ-MS31-CY220U
Ink cartridge M (Magenta: 220 ml) VJ-MS31-MA220U
Ink cartridge Y (Yellow: 220 ml) VJ-MS31-YE220U
Ink bag K (Black: 1,000ml) VJ-MS31-BK1000U
Ink bag C (Cyan: 1,000ml) VJ-MS31-CY1000U
Ink bag M (Magenta: 1,000ml) VJ-MS31-MA1000U
Ink bag Y (Yellow: 1,000ml) VJ-MS31-YE1000U