PRISMJET 54 Gen2 - Page 239

PrismJET 54 Gen2 OPERATION MANUAL Maintenance
6.2 Cleaning the printer 249
2. Display the CR Maintenance menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• “Menu1: Setup>” is displayed on the operation panel.
• The operation panel shifts to the Setup menu display.
b. Press the [>] key on the operation panel.
• “Set1: User Type” is displayed on the operation panel.
c. Press the [+] key or [–] key to select “Set17: CR Maintenance”.