Product overview PrismJET 54 Gen2 OPERATION MANUAL
34 2.2 Printer status
(2) Setup menu display → Normal
When the printer is at the Setup menu display, perform either of the following operations to shift the
operation panel to the Normal display.
• Press the [Cancel] or [Menu] key on the operation panel.
• In the Setup menu, leave the keys untouched for three minutes.
• For details on Status message, refer to “7.2.1 Status messages”.
Normal
Setup Menu Display
[Menu] key
[Cancel] key
Leave the printer
as it is for 3 minutes
To Next Page
Loading...