Troubleshooting PrismJET 54 Gen2 OPERATION MANUAL
298 7.1 Malfunctions and failures
(6) Printing lines are duplicated or patchy
2 Did you perform Alignment? Perform Alignment.
3.6 Adjust
Print
3 Did you perform Media feed adjustment? Perform Media feed adjustment.
4.2.6 Media
feed adjustment
No. Possible cause Remedy Reference
1 Is the nozzle in good condition? Perform Head cleaning.
6.2.3 Head
cleaning
2 Is the head height set to High or Middle? Return the head height to “Low”.
4.2.5 Head
height adjustment
No. Possible cause Remedy Reference
To Next Page