PRISMJET 54 Gen2 - Page 290

Troubleshooting PrismJET 54 Gen2 OPERATION MANUAL
300 7.2 Error messages
17 Power Off Turning the printer off.
Please wait a while.
Do not unplug the power cable till the
operation panel is turned off.
3.2.2 Turning
the power OFF
18 Insert CleaningCart. Washing the head.
Install the cleaning cartridge.
3.3 Installing
ink cartridges
19 Insert InkCartridges Charging the ink.
Insert the ink cartridge.
3.3 Installing
ink cartridges
20 User: Type ** OK? Initializing the media.
Please wait a while.
(** represents the setup media type)
3.4.4 Setting
the User Type
Setting
21 Media Initial
22 No Media The media is not loaded.
Load the media.
3.4 Loading
media
23 Media Initial - Off The printer is unable to display the "Roll
Length Manage" menu because Media Initial
is set to "Off".
5.1.4 Media
Initial menu
24 Perform Adjust Print The message appears on the operation panel
every 30 days to prompt you to run an
adjustment print.
Press [Enter] key will clear the message.
When the message disappears, print an adjust
print pattern.
3.6 Adjust
Print
No. Display Description Reference