PRISMJET 54 Gen2 - Page 55

PrismJET 54 Gen2 OPERATION MANUAL Before using
3.4 Loading media 65
3. Press the [Enter] key on the operation panel.
• The user type setting is set.
• “Media initial” is displayed on the operation panel and media initialization starts.
NOTE
If the following operations are performed in the user type setting menu, the printer starts media
initial operation without specifying a user-defined setting.
• Pressing the [Cancel] key on the operation panel.
• No keys on the operation panel are pressed for 30 seconds.
• After media initial operation is complete, detected media width is displayed on the operation
panel.
Press the [Enter] key on the operation panel and the display shifts to Normal.
4. When using the roll media, turn the scroller by hand to rewind the roll media and eliminate any slack.
• Media set is complete.
No. Name
1 Roll media
2 Scroller
1
2
2