Promise Technology Vess R3600 Series User Manual

Adding a Fibre Channel or iSCSI Initiator
You must add an initiator to the Vess R3600’s initiator list in order to map your LUN or logical drive to the
initiator.
This action requires Administrator or Super User privileges.
To add a Fibre Channel or iSCSI initiator to the list:
1. Click the Device tab.
2. Click the Initiator icon.
3. Click the Add Initiator button.
4. Choose the network Type (FC or iSCSI)
5. Input the initiator name in the elds provided.
A Fibre Channel initiator name is the World Wide Port Name of the initiator, composed of a series of eight,
two-digit hexadecimal numbers. The iSCSI initiator name is composed of a single text string.
6. Click the Submit button.
The initiator is added.
ManagIng InItIators
110
Promise Technology Vess R3600 / Vess J3600 Product Manual

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English