Promise Technology Vess R3600 Series - Page 131

Deleting an Initiator
Caution
If you delete an initiator, you delete the LUN map associated with
that initiator. Verify that the LUN map is no longer needed before
deleting the initiator
This action requires Administrator or Super User privileges.
To delete a Fibre Channel initiator:
1. Click the Device tab.
2. Click the Initiator icon.
3. Click the trash can icon on the initiator if you want to delete it.
4. In the Conrmation box, type the word “conrm” in the eld provided and click the Conrm button
The initiator is removed from Vess R3600’s initiator list.
Viewing Initiators
The Vess R3600’s initiator list displays initiators available for mapping to a LUN or logical drive. You must add
initiators to the Vess R3600’s initiator list to make them available for mapping to a LUN.
To view a list of initiators:
1. Click the Device tab.
2. Click the Initiator icon.
The list of initiators appears. Initiator information includes:
• ID – Initiator 0, Initiator 1, Initiator 2, etc.
• Type - Choose FC or iSCSI
Fibre Channel – WWPN: Enter the World Wide Port Name of the initiator, composed of a
series of eight, two-digit hexadecimal numbers.
iSCSI – Name: Enter the iSCSI name of the initiator device, composed of a single text
string.
111
Promise Technology Management with WebPAM PROe