Promise Technology Vess R3600 Series User Manual

Adding a Fibre Channel or iSCSI Target
You must add an target to the Vess R3600’s target list in order to map your LUN or logical drive to the target.
This action requires Administrator or Super User privileges.
To add a Fibre Channel or iSCSI target to the list:
1. Click the Device tab.
2. Click the Target icon.
3. Click the Add Target button.
4. Input the target name in the elds provided.
A Fibre Channel target name is the World Wide Port Name of the target, composed of a series of eight,
two-digit hexadecimal numbers. The iSCSI target name is composed of a single text string.
5. Click the Submit button.
The target is added.
ManageIng targets
Add Target
112
Promise Technology Vess R3600 / Vess J3600 Product Manual

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English