114
Trinity F90+ user manual
6. Change settings:
It is not recommended to change the settings of the Sony UMC-R10C camera. By default the shutter speed is set to
1/1000s, the aperture is set to F8 and the ISO is set to Auto. Due to a better trigger speed, the focus is set to Manual
Focus (innity). Nevertheless it is possible to change the settings.
7. In order to save the settings select Power Off in the bottom left corner. The camera is switched off and the software is
closed.
Reset the focus mode to manual (innity)
1. Run through steps 1 – 6 and select Manual Focus.
2. In order to save the settings select Power Off in the bottom left corner. The camera is switched off and the software is
closed.
11.2.2 Sony UMC-R10C standard settings
To Next Page
Loading...
Need help?
General