Quantum Trinity F90+ - RC Transmitter Settings

33
Trinity F90+ user manual
6
Battery & RC Transmitter
6.6.4 RC transmitter settings
Open the Setup menu
The transmitter is switched off. Then press and hold the right transition button of the RC trans-
mitter and the power button simultaneously for about 5 seconds until the display turns on automatically.
Setup
Choose between the following settings.
Basic settings
Change the user name.
Set the language.
Set the battery alarm.
Set the throttle mode (stick conguration). If you change the stick conguration,
the sticks are swapped.
M-Link settings
Please see chapter Binding the RC Transmitter if you have questions concerning a range check or concerning the
binding.
6
Battery & RC Transmitter