41
Trinity F90+ user manual
7.1.3 Drivers
QBase Modem driver
For the connection between QBase and the UAV via the QBase modem a driver is required. If you have problems connecting
the UAV to your computer via the QBase modem, make sure the driver is installed.
The required driver can be found in the Windows directory: Programs Quantum Systems QBase 3D Drivers QBase
Modem
Open CDM21228_Setup.exe and follow the instructions of the installation guide.
Autopilot
When using Windows 8 for the connection between QBase and the UAV via USB a driver is required. If you have problems con-
necting the UAV to your computer via USB make sure the driver is installed.
The required driver can be found in the Programs Quantum Systems QBase 3D Drivers Autopilot
Open Setup_W8_x64.exe (also for windows 10) and follow the instructions of the installation guide.
QBase – Ground Control Station
7
To Next Page
Loading...
Need help?
General