120
Trinity F90+ user manual
12. Verify the software was updated by checking the “Settings” page on the Mica Sense web interface.
The rmware version number is shown at the bottom of the page.
11.3.5 MicaSense RedEdge-M/MX conguration
1. Connect the payload compartment to the Trinity. Please
make sure the SD card is connected to the Mica Sense
camera.
2. Connect the battery to the Trinity.
3. Establish the WiFi connection between the camera and
your computer.
Camera WiFi name: Rededge MX-[serial number],
password: micasense
4. Open http://192.168.10.254 in your web browser in
order to access the Mica Sense web interface.
5. Congure the MicaSense Altum camera according to
the following settings by opening the tab Settings in
the MicaSense webinterface.
Basic conguration section
6. Click Save button on the bottom of this section to save
the basic conguration.
To Next Page
Loading...
Need help?
General