150
Trinity F90+ user manual
13.6 CLEAN THE AIRSPEED SENSOR
Only relevant for UAV‘s delivered as of Q2 2021 starting with serialnumber
00686.
The new airspeed sensor provides the user with the possibility to easily clean
and exchange the pitot tube.
Please clean or exchange the pitot tube in case AIRSPEED SENSOR
MALFUNCTION is triggered.
1. Please remove the airspeed sensor from the main body via the
magnetic connection.
2. Please use compressed air in order to clean the sensor. The sensor
can be cleaned from both directions. To nish the process please
make sure that no more dust or dirt is visible inside the tube.
To Next Page
Loading...
Need help?
General