Quantum Trinity F90+ - Micasense Rededge-M;MX;Altum Double Configuration

122
Trinity F90+ user manual
11.3.6 MicaSense RedEdge-M/MX Double conguration
General Setup for both cameras
1. Connect the payload compartment to the Trinity. Please
make sure the SD card is connected to the Mica Sense
camera.
2. Connect the battery to the Trinity.
3. Establish the WiFi connection between the camera and your
computer.
Camera WiFi name:
Red: rededgeRX-[serial number] or
Blue: rededgeBX-[serial number], password: micasense
4. Open http://192.168.10.254 in your web browser in order to
access the Mica Sense web interface.
5. Congure the cameras according to the following settings
by opening the tab Settings in the MicaSense webinterface.
6. Congure the Red camera (RededgeRX-SN):
Basic conguration section
7. Click Save button on the bottom of this section to save the basic conguration.