126
Trinity F90+ user manual
11.3.7 MicaSense RedEdge Altum conguration
1. Connect the payload compartment to the Trinity. Please make
sure the SD card is connected to the Mica Sense camera.
2. Connect the battery to the Trinity and power it.
3. Establish the WiFi connection between the camera and your
computer.
Camera WiFi name:
Red: ALTUM-[serial number], password: micasense
4. Open http://192.168.10.254 in your web browser in order to
access the Mica Sense web interface.
5. Congure the MicaSense Altum camera according to the
following settings by opening the tab Settings in the
MicaSense webinterface.
Basic conguration section
6. Click Save button on the bottom of this section to save the
basic conguration.
To Next Page
Loading...
Need help?
General