35
Trinity F90+ user manual
6.6.6 Charging the RC transmitter
The QS RC Transmitter is charged via the Mini USB on the back of the transmitter.
6.6.7 RC transmitter rmware update
If an update for the QS RC transmitter becomes available, you will be informed by your reseller.
1. Connect the USB cable to the Mini USB port on the back of the transmitter and connect the transmitter to your
computer, laptop or tablet.
2. The transmitter is switched on.
3. Select USB data connection.
4. The transmitter COCKPIT_C3 is now displayed in the le explorer of your PC.
5. Delete all folders in the COCKPIT_C3 directory.
6. Unpack the new rmware .zip le.
7. Insert all subfolders of the rmware folder into COCKPIT_C3.
8. Disconnect the USB connection between the transmitter and your computer, laptop or tablet.
9. Push the left transition button and the power button simultaneously until the red LED starts rotating.
10. The LED on the transmitter starts rotating. The transmitter starts to update.
11. The update is nished when the display switches on and the lights are yellow.
6.7 COOLING STATION
In case of Motor Temperature too high please use the cooling station to cool down the ECS temperature. The cooling station
turns on automatically when connrcted to the Trinity F90+ battery. Insert the cooling station outlet into the air inlet of the Trinity
F90+. The cooling station needs about 3 minutes to cool down the ECS temperature. The cooling station needs to be ordered
separately.
6
Battery & RC Transmitter
To Next Page
Loading...
Need help?
General