153
Trinity F90+ user manual
14.2 ADDITIONAL LED STATUS MAIN BODY
STATUS
See chapter =
LED STATUS MAIN BODY
BATTERY
Color: blue =
Battery connected
PMB
Color: blue =
PMB connected
GPS
Color: blue =
GPS 7 Sats connected
These additional LEDs are only relevant for
UAVs delivered as of Q2 2021 starting with
serialnumber 00686:
14.3 CONNECTION BETWEEN QBASE AND THE UAV CANNOT BE ESTABLISHED
To guarantee a stable connection between QBase and UAV via the QBase modem, ensure that both devices have the same
temperature.
Option 1: Ensure that the QBase modem is recognized by the computer, laptop or tablet.
1. Check your Windows device manager for the modem (COM-Port).
2. If it is not recognized, try another USB port.
Option 2: Disconnect the battery and connect it again. Switch on the UAV again. Restart QBase. Do not disconnect the modem
inbetween.
If none of the options is successful, contact your reseller.
14.4 THE CONTROL SURFACE CHECK IS NOT SUCCESSFUL
1. Disconnect the battery from the UAV.
2. Make sure every part is assembled correct.
3. Connect the battery again.
4. Switch on the UAV again.
5. If the control surface check is still not successful, contact your reseller.
Troubleshooting
14
To Next Page
Loading...
Need help?
General