99
Trinity F90+ user manual
Step 8 – Arm
!!NEVER ARM AN AIRCRAFT WITH A DAMAGED PROPELLER!!
The arming process starts the motors.
1. Select ARM on the display of the transmitter.
2. Conrm the arming process by selecting Yes!. Abort the process by selecting No!
3. The motors start running at idle. If you wish to turn off the motors, select OFF.
•
Due to safety reasons the UAV will turn off the motors automatically after 30 seconds if no button has been pressed.
• Make sure the motors are spinning freely. If the spinning of the motors emits an untypical sound, turn off the motors.
• Make sure all three motors are tilted 90° upwards. If not, turn off the system. Contact your reseller for further assistance.
Front alignment:
tilted upwards correct for
take-off/landing
CORRECT
Front alignment: neutral position
CORRECT
Rear alignment:
neutral position
correct for
forward ight
CORRECT
Rear alignment:
tilted upwards correct for
take-off/landing
CORRECT
9
Flight operation
To Next Page
Loading...
Need help?
General