26
Trinity F90+ user manual
[User Setup]
Language = Set the language (English, German, Italian, French)
Key Beep = Mute / unmute the key beep.
Buzzer = Mute / unmute the audio signal. The signal noties you when the
charging process is nished or in case of an error.
Input Low = Set minimal input voltage (range 10.3 V – 11 V). Is used for safe-
ty reasons to not drain your car battery.
Note: Other settings than the one described above cannot be changed.
[BID (battery identication) Info]
It is possible to read out data saved on the battery.
ChgCapa = Charged capacity
ChgCycles = Charging cycles
dChgCaps = Discharged capacity
To Next Page
Loading...
Need help?
General