45
Trinity F90+ user manual
7
Remote Control
In this menu you can bind the RC to the Trinity.
Search updates
If new updates are available you can download
them.
Account
QBase offers the possibility to create a user account.
This allows to share missions between different com-
puters.
The missions are automatically saved online to the
corresponding account when being connected to the
internet.
Furthermore, QBase3D can be used in the standard
version or the Pro version. With every purchase of
a Trinity F90+ one Pro license is delivered. The Pro
License can be activated by connecting the Trinity
F90+ to your computer while being logged into your
account.
The license le is then saved in the correspondig ac-
count. When logging into the same account on a dif-
ferent computer the Pro license will also be available.
One license key from a Trinity F90+ can be used with
multiple accounts.
The Pro license enables the user to use the KML Edi-
tor functions (see chapter 7.2.3).
Firmwares
In this menu you can install new PMB and UAV
rmwares.
ESC Firmware
Flash new ESC rmware.
License
If a 90 minutes license is available the 90 minutes
license can be activated. Please follow the steps de-
scribed in this manual.
Mission Synchronization
When logged into the account missions can be up-
loaded to your account. This offers the possibility to
open the same mission on a different computer when
logged into your account.
The green check mark shows that the upload was
successful.
To Next Page
Loading...
Need help?
General