XLi EDGE QubicaAMF Pinspotter
Section 2 Page 2-2 Rev. Date: 10/2016
This symbol means STOP, DO
NOT PROCEED, and is a
warning that hazards could
exist. It is often followed by
other symbols.
This symbol means that the
mechanic should read,
understand, and follow the
technical manual before
servicing the machine.
This symbol indicates a
LOCKOUT/TAGOUT point for
performing maintenance.
This symbol reminds the user to
remove main power from the
machine prior to performing
maintenance.
This symbol warns the
mechanic to unplug the motor
before servicing.
This symbol indicates STOP! NO
ACCESS FOR UNAUTHORIZED
PERSONS. Service should be
performed by authorized,
trained personnel only.
This symbol indicates that eye
protection is required.
This symbol indicates that
hearing protection is required.
This symbol is a warning
against breaking a photo eye
beam, which will cause the
machine to cycle.
This symbol indicates that the
machine may start or cycle
automatically without warning.
This symbol states that a
crushing hazard exists.
This symbol is a warning against
operating the equipment with
the guards removed.
This symbol denotes that an
entanglement hazard
associated with gears exists.
This symbol denotes that an
entanglement hazard associated
with belts and pulleys exists.
This symbol warns that a falling
hazard exists.
This symbol warns that a
tripping hazard exists.
To Next Page
Loading...
Need help?
General