QubicaAMF XLi EDGE Series - Sweep Motor Trips Overload

Troubleshooting
400-088-120-02 Page 4.6-13 Rev. Date: 10/2016
Section 4.6
4.6.3.3 PROBLEM: Sweep motor trips overload.
Figure 4.6-12
START
YES
Bind in sweep
drive assembly?
Repair bind.
YES
Defective
chassis?
Replace chassis.
Replace or Repair motor
cable.
YES
Motor cable
defective?
YES
Motor
defective?
Replace motor.
NO
NO
NO
NO
NO
Remove pin.
Pin jammed
in gutter?
YES
Chassis harness
defective?
Repair chassis harness.
YES