EasyManuals Logo

QubicaAMF XLi EDGE Series User Manual

QubicaAMF XLi EDGE Series
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Section 3.
Pinspotter Mechanical Operation
400-088-120-02 Page 3-21 Rev. Date: 10/2016
DMX Dimmer Box Lights
You’ll notice that there are six (6) lights on the DMX Dimmer Box:
LEDs on D1 and D2
D1 Green: Power The green LED indicates if the system is powered on.
D1 Yellow: Machine Connection The yellow LED is turned on when the connection to
the machine (TMS or XLi) is correctly established. The machine has to be physically
connected through the dimmer port S1. When a command is received, the yellow LED
is turned on to indicate the correct reception.
D2 Green: DMX Command The green LED is powered on when a DMX command
received through D1/D2 is received and processed.
D2 Yellow: DMX Activity The yellow LED is powered on if the DMX line connected
through D1/D2 is active.
LED Status
Status LEDs refer to the Lamp Output Ch1 and Ch2
LED On: Light has turned on in white (requested from machine).
LED Blink: Light has been turned on in color (requested from the machine) or in DMX (if
requested from the DMX server).
LED Off: Light is off.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QubicaAMF XLi EDGE Series and is the answer not in the manual?

QubicaAMF XLi EDGE Series Specifications

General IconGeneral
BrandQubicaAMF
ModelXLi EDGE Series
CategoryAccessories
LanguageEnglish