D-4 Custom QuickLabel setup
8 Click on the Communications tab. The following screen will appear:
9 Select the desired Printer Communication:
Bidirectional (recommended) - This option permits two-way
communication with the printer. The printer will report status back to
the host computer via the serial port connection. The parallel, serial, or
ethernet port is used to transmit data to the printer.
Unidirectional - This option permits one-way communication with the
printer. The printer status cannot be transmitted back to the host when
using this communication method.
Network - Used to communicate with a printer in a networked
environment. This is the optimal setting for a single printer with
multiple users requiring queuing via the Windows print spooler. Printer
status cannot be transmitted back to the host when using this
communication method. The QuickLabel Windows Printer Driver must
be installed to use this communication mode.
Print to File - This communication method is used to generate ASCII
label format files and binary image/font files. No communications
interface connections are required when this option is selected.
To Next Page
Loading...