R&S NRP2 - Page 217

Remote Control - Commands
R&S
®
NRP2
199User Manual 1173.9157.02 ─ 03
Command Preset and *RST value Remark
SENS<[1]..4>:AC:RANG 1 | 2 | 3
Depending on sensor.
SENS<[1]..4>:AC:RANG:AUT ON | OFF
Depending on sensor.
SENS<[1]..4>:AC:RANG:CLEV <NRf>
Depending on sensor.
SENS<[1]..4>:APER <NRf>
Depending on sensor.
SENS<[1]..4>:AUXiliary NONE | MINM
Depending on sensor.
SENS<[1]..4>:AVER ON | OFF
Depending on sensor.
SENS<[1]..4>:AVER:COUN <NR1>
Depending on sensor.
SENS<[1]..4>:AVER:COUN:AUTO ON | OFF
Depending on sensor.
SENS<[1]..4>:AVER:COUN:AUTO:
MTIMe
<NRf>
Depending on sensor.
SENS<[1]..4>:AVER:COUN:AUTO:
RES
<NRf>
Depending on sensor.
SENS<[1]..4>:AVER:COUN:AUTO:
SLOT
<NR1>
Depending on sensor.
SENS<[1]..4>:AVER:COUN:AUTO:
NSR
<NRf>
Depending on sensor.
SENS<[1]..4>:AVER:COUN:AUTO:
TYPE
RES | NSR
Depending on sensor.
SENS<[1]..4>:AVER:TCON MOV
REP
PRES and SYSTem:PRESet.
*RST
SENS<[1]..4>:BAND:VID
SENS<[1]..4>:BWID:VID
<string>
Depending on sensor.
SENS<[1]..4>:BUFF:SIZe <NR1>
Depending on sensor.
SENS<[1]..4>:BUFF:STAT ON | OFF
Depending on sensor.
SENS<[1]..4>:BURS:CHOP ON | OFF
Depending on sensor.
SENS<[1]..4>:BURS:DTOL <NRf>
Depending on sensor.
SENS<[1]..4>:CHOP ON | OFF
Depending on sensor.
SENS<[1]..4>:CORR:DCYC <NRf>
Depending on sensor.
SENS<[1]..4>:CORR:DCYC:STAT ON |OFF
Depending on sensor.
SENS<[1]..4>:CORR:FDOT -
No change.
SENS<[1]..4>:CORR:FDOT:STAT OFF
SENS<[1]..4>:CORR:OFFS <NRf>
Depending on sensor.
SENS<[1]..4>:CORR:OFFS:STAT ON | OFF
Depending on sensor.
SENS<[1]..4>:CORR:SPD:SEL <NR1>
Depending on sensor.
SERV<[1]..4>:DISP:OVER OFF
Display overload warnings.
SENS<[1]..4>:FREQ -
No change.
Common Commands to IEEE 488.2