R&S NRP2 - Page 218

Remote Control - Commands
R&S
®
NRP2
200User Manual 1173.9157.02 ─ 03
Command Preset and *RST value Remark
SENS<[1]..4>:FUNC "POW:AVG"|
"POW:BURS:AVG"|
"POW:TSL:AVG"|
"XTIM:POW"
Depending on sensor.
SENS<[1]..4>:TGAT<[1]..4>:MID:
OFFS
<NRf>
Depending on sensor.
SENS<[1]..4>:TGAT<[1]..4>:MID ON | OFF
Depending on sensor.
SENS<[1]..4>:TGAT<[1]..4>:MID:
TIME
<NRf>
Depending on sensor.
SENS<[1]..4>:TGAT<[1]..4>:
OFFS:TIME
<NRf>
Depending on sensor.
SENS<[1]..4>:TGAT:SEL 1
SENS<[1]..4>:TGAT<[1]..4>:TIME <NRf>
Depending on sensor.
SENS<[1]..4>:TSL:CHOP ON | OFF
Depending on sensor.
SENS<[1]..4>:TSL:COUNt <NR1>
Depending on sensor.
SENS<[1]..4>:TSL:MID:OFFS <NRf>
Depending on sensor.
SENS<[1]..4>:TSL:MID ON | OFF
Depending on sensor.
SENS<[1]..4>:TSL:MID:TIME <NRf>
Depending on sensor.
SENS<[1]..4>:TSL:WIDTh <NRf>
Depending on sensor.
SENS<[1]..4>:RANG 1 | 2 | 3
Depending on sensor.
SENS<[1]..4>:RANG:AUT ON | OFF
Depending on sensor.
SENS<[1]..4>:RANG:CLEV <NRf>
Depending on sensor.
SENS<[1]..4>:RGAM <NRf>
Depending on sensor.
SENS<[1]..4>:RGAM:PHAS <NRf>
Depending on sensor.
SENS<[1]..4>:SAMP FREQ1 | FREQ2
Depending on sensor.
SENS<[1]..4>:SGAM <NRf>
Depending on sensor.
SENS<[1]..4>:SGAM:CORR:STAT ON | OFF
Depending on sensor.
SENS<[1]..4>:SGAM:PHAS <NRf>
Depending on sensor.
SENS<[1]..4>:SMO:STAT ON | OFF
Depending on sensor.
SENS<[1]..4>:STAT:OFFS <NRf>
Depending on sensor.
SENS<[1]..4>:STAT:SAMP <NR1>
Depending on sensor.
SENS<[1]..4>:STAT:SCAL:X:POIN <NR1>
Depending on sensor.
SENS<[1]..4>:STAT:SCAL:X:RANG <NRf>
Depending on sensor.
SENS<[1]..4>:STAT:SCAL:X:RLEV <NRf>
Depending on sensor.
SENS<[1]..4>:STAT:TIME <NRf>
Depending on sensor.
Common Commands to IEEE 488.2