54
[Name]: Decides the name of the monitor window.
[Options]: Sets monitor conditions.
[Address]: Sets the start address for monitoring.
[Size]: Sets the range for monitoring.
[Access]: Sets the access size to be displayed in the monitor window.
[Auto-Refresh at rate (ms)]: Sets the interval for acquisition by monitoring (500 ms at minimum).
[Reading the Initial Value]: Selects reading of the values in the monitored area when the monitor
window is opened.
[Color]: Sets the method to update monitoring and the attribute of colors.
[Change Indicator]: Selects how to display the values that have changed during monitoring
(available when [Reading the Initial Value] has been selected).
No change: No color change.
Change: Color is changed according to the [Foreground] and [Background]
options.
Gray: Those data with values that have not been changed are displayed in
gray.
Appear: A value is only displayed after changed.
[Foreground]: Sets the color used for display (available when [Change] has been selected).
[Background]: Sets the background color (available when [Change] has been selected).
[Mayfly]: A check in this box selects restoration of the color of those data which have
not been updated in a specified interval to the color selected in the
[Background] option. The specified interval is the interval for monitor
acquisition (available when [Change], [Gray], or [Appear] has been selected).
[Detail]: Sets the items specific to the emulator. Not used with this emulator.
[History]: Displays the previous settings.
Notes: 1. In this emulator, odd addressees cannot be specified as the start addresses for monitoring.
2. Selection of the foreground or background color may not be available depending on the operating
system in use.
After setting, clicking the [OK] button displays the [Monitor] window.
To Next Page
Loading...
Need help?
General
