Ricoh Interactive Whiteboard Controller Type 2 User Manual

Wired Network Settings
Item Description Initial value
Network Auto Settings Specify whether or not to configure the Network
Settings automatically.
If you clear this check box, specify the following
settings:
• IP Address
• Subnet Mask
• Default Gateway
• Dynamic DNS is not supported. If "Network
Auto Settings" is selected, the IP address is
obtained automatically, but the host name is
not set.
Selected
DNS Auto Settings Specify whether or not to configure the DNS
server settings automatically.
If you clear this check box, specify the following
settings:
• Preferred DNS Server
• Alternate DNS Server
Selected
Ethernet Rate Selects an Ethernet speed. Auto Settings
802.1X Authentication
Settings
*1
Configure the settings to use the 802.1X
authentication function in a wired LAN.
-
MAC Address Indicates the MAC address of the wired LAN
adapter.
-
*1
This item cannot be displayed from the machine's Web page.
Configuring Network Settings
169

Ricoh Interactive Whiteboard Controller Type 2 Specifications

General

Brand	Ricoh
Model	Interactive Whiteboard Controller Type 2
Category	Controller
Language	English