While Using Remote Whiteboard
Problem Causes Solutions
A connection is not
established although the
previously used passcode
has been entered.
The entered passcode is
incorrect.
A different passcode is generated
each time the Interactive Whiteboard
starts up. To participate in a remote
whiteboard session, check and use the
correct passcode.
When Using a USB Flash Memory Device
Problem Causes Solutions
A USB flash memory device
is not recognized.
The "Use USB Memory"
check box in Administrator
Settings is not selected.
Select the "Use USB Memory" check
box in Administrator Settings. For
details about how to change the
system settings, see page 206
"Changing the System Settings".
A message prompting for
restart appears when a USB
flash memory device is
inserted.
A configuration change
requiring system restart has
been made.
Quickly press and release the power
button of the display. When the
machine shuts down, press the power
button again to restart the machine.
When you are using RICOH
Interactive Whiteboard D3210/
D8600 and [For standby press the
power button] is enabled, press and
hold the power button to shut down
the machine while the whiteboard
screen is displayed.
9. Troubleshooting
292
To Next Page
Loading...
Need help?
General
