Ricoh Interactive Whiteboard Controller Type 2 - Changing Print Settings

Changing the Print Settings
You can configure the following settings on the "Print Settings" window in Administrator Settings.
When using a printer using Universal Print Driver for this machine, be sure to configure the following
settings:
Item Description Initial value
Printer Address Sets the IP address of the printer. You also can enter
the host name.
RICOH Streamline NX v2
If you are using RICOH Streamline NX-based
authentication, enter the SPM (Secure Print
Manager) server address of the printer.
RICOH Streamline NX v3
If you are using RICOH Streamline NX-based
authentication, enter the Delegation server
address of the printer.
Blank
Print Authentication Specifies the type of Print Authentication.
• "No"
Do not authenticate printing. When the settings
are being configured from the Web page of the
machine, this item is displayed as [Off].
• "User Code Authentication"
Use a user code for Print Authentication.
• "User Authentication"
Use a user name and password for Print
Authentication.
No
User Code If "User Code Authentication" is selected in "Print
Authentication", enter a user code of 0 to 8 digits.
Blank
User Name If "User Authentication" is selected in "Print
Authentication", enter a user name that consists of a
character string of 0 to 128 characters.
Blank
Password If "User Authentication" is selected in "Print
Authentication", enter a password that consists of a
character string of 0 to 128 characters.
Blank
8. Changing the Interactive Whiteboard Settings
230