Using the Crestron Function
You can connect and control the machine on a network from Crestron system as a Crestron supported
device.
The following operations can be performed from Crestron system:
• Turning the power on and off (Whiteboard enters standby mode when its power is turned off)
• Switching input (including a computer that is connected via IWB Remote Desktop Software)
• Adjusting the volume (turning up or down the volume, mute on or off)
• To use the Crestron function, enable it in System Settings. For details, see page 206 "Changing the
System Settings".
Using the Crestron Function
305
To Next Page
Loading...
Need help?
General
