Ricoh Interactive Whiteboard Controller Type 2 User Manual

Configuring SMTP Server Settings
You can configure the following settings of the SMTP Server on the "Email Settings" window in
Administrator Settings.
Item Description Initial value
Address
*1
Enter the address of the SMTP server. You can
also enter the host name. When you enter the
host name, you must configure the DNS server
settings.
-
Port Number
*2
Enter the port number for SMTP. 25
Sender Email Address Specify the e-mail address of the sender.
If you are using the user authentication function
and [Use the authentication information] is
selected for [Sender Email Address when Email
Sending Function] in the [User Authentication
Settings], the e-mail address of the logged-in user
is used as the sender e-mail address.
-
Require Authentication Specify whether or not SMTP server
authentication is required.
If you select this check box, enter the account and
password for the SMTP server.
Not selected
Security Specify whether or not to encrypt e-mails
destined for the SMTP server with STARTTLS.
Not selected
Set the max size for attached
files
Specify whether or not to split an attached file to
be sent.
If you select this check box, specify the upper limit
for the size of an attached file.
Selected
(5MB)
*1
When the machine settings are being configured from the Web page of the machine, this item is displayed as
[SMTP Server Address].
*2
When the machine settings are being configured from the Web page of the machine, this item is displayed as
[SMTP Server Port Number].
• Windows CAL might be required to use the Windows server functionality on the SMTP server. For
details about the Windows CAL license, see the Microsoft home page.
8. Changing the Interactive Whiteboard Settings
176

Ricoh Interactive Whiteboard Controller Type 2 Specifications

General

Brand	Ricoh
Model	Interactive Whiteboard Controller Type 2
Category	Controller
Language	English