• If the area that your finger touches on the screen is too narrow, the touch may not be recognized
correctly, resulting in a deletion failure.
• Fair copy entered text, graphics, or stamps cannot be partially deleted.
• When the machine is in palm deletion mode, you cannot perform any operation other than
deletion.
• Up to 4 deletion icons can be displayed and operated at a time.
• In addition to your finger, you can use a commercially available whiteboard eraser or the like. To
avoid damaging the screen, use a whiteboard eraser made from soft materials such as cloth.
• On the RICOH Interactive Whiteboard D6500/D8400, a message prompting you to update the
firmware of the touch sensor may appear. If the message appears, follow the message to update
the firmware. If you cancel the update, you cannot use palm deletion mode.
Enlarging, Reducing, or Moving the Strokes
You can enlarge, reduce, or move the written text or drawn figures after selecting it.
Selecting a stroke
1. Touch , the Select and Delete icon, and check that , the Select icon, is selected. If
it is not selected, touch , the Select icon.
You can also touch , the Select icon, on the menu that appears when you touch and hold
down the whiteboard screen.
2. Using a Whiteboard
46
To Next Page
Loading...