Changing the System Settings
You can configure the following settings on the "System Settings" window in Administrator Settings.
Item Description Initial value
Whiteboard Location Name To change the name, touch [Change]. Specifies
the name of the location where the machine is
installed. The location name can consist of a
string of 0 to 255 characters.
Blank
Update system from network
on startup
Specify whether or not to automatically update
the system when the whiteboard starts.
Selected
Check the Latest Version Touch [Check the Latest Version] to check if a
newer version of the system is available for
update on the network.
-
Upload
*2
Updates the system using firmware
downloaded to your computer in advance.
-
Display confirmation dialog
box before system update
Specify whether to show a confirmation
message when restarting the machine. Note
that even if you enable this item, a confirmation
message appears only when you turn the
power off by using the power button on the
display. If you turn the power off from a Web
page, or the machine restarts automatically, a
confirmation message does not appear.
Selected
Auto Shutdown Time Specifies the time interval before the machine
automatically shuts down.
However, the machine does not shutdown
automatically when a screen or image from a
device connected to the machine is displayed,
or when printing is in progress.
5 hour(s)
8. Changing the Interactive Whiteboard Settings
206
To Next Page
Loading...